Replacing Lock on uPVC Door
If you want to replace the lock on your door made of upvc it is necessary to remove the handle and screw holes. upvc window locking mechanism repair is usually simple to do.
The next step is to locate the screw that holds the lock barrel in place. This screw is typically a different color than the other screws, and is situated on the outside of the faceplate.
Remove the Cylinder
The first step to change the lock on your upvc door is to take off the current lock cylinder from the door. This is a simple procedure that can be accomplished in around 30 minutes. All you need is an screwdriver. The Euro Cylinder screw is normally found on the inside of the door next to the lock cylinder. The screw should be easily identifiable because it is typically a different colour to the other screws. Take it off and store it in a safe location.
After you have removed the cylinder, you can then begin removing the handle. To do this, you must open the door to allow full access to the inside edging of the door and the side of the faceplate of the lock.
Take off the screw that connects the handle to the door using a screwdriver. Once the screw is removed then you can pull the handle towards you and the rest of it out of the door.
If you are having trouble getting the handle off the door frame, you might have to take it off. This can be accomplished with a screwdriver or drill and you'll need be careful not to damage the screw head or cross-thread the screw.
When you're ready for replacing the cylinder, make sure it is the right size for the door you have. Cylinders are measured using two factors: (a), the distance from the center of the Fixing Screw to the bottom of cylinder and (b) the distance between the hole of the keyhole and the edge of the lockplate.
Take the handle off
The good news is that if your upvc handle becomes stiff, floppy or loose, it's an easy issue to fix. The cause is usually due to wear and tear on the cylinder or internal parts of the multipoint lock, which are inside the door between the handle and the frame. It is not uncommon for upvc locks to get worn due to extreme weather conditions, heavy use or simply ageing and this will often lead to problems with the locking or closing mechanism of the door.
If the cylinder is been damaged, it can be difficult to turn the key and the lock can become stiff, which could cause the handle to droop. The cylinder can be easily replaced, and it is a straightforward process. It is possible to do it yourself, though some understanding of how the mechanism operates will be required. You'll need to take off the handle in order to replace the cylinder.
To do this, you will need a screwdriver as well as tape measure. It is important to know the exact size of your cylinder, to be able to purchase a replacement that fits. The cylinder is what allows you to lock the door of your upvc. It is essential to purchase an alternative that is the same size.
To take out the old cylinder, you'll need to remove the screws that are holding it. Be careful not to remove the screws, as this may make it very difficult to remove them again in the future. After the screws have been removed, the cylinder will come out easily.
Take off the Lock Barrel
uPVC is a very strong material that is designed to ensure your family and you are secure. They are available in various styles and colors that will fit any style. They are also maintenance-free, and thermally efficient. However, they are not without their drawbacks. The locking point, also known as a barrel lock, can become faulty over time and must be replaced. It's a simple procedure however there are a few things you should know before beginning.
You will need to remove the door handle in order to reach the screw that holds the lock cylinder. The screw is typically different from the other screws and can be found near the keyhole on the door's edge. Take the screw off and put it away in a safe place. Slide the handles off both the inside and outside of the door. Make sure to do this slowly and not too fast as it can damage your uPVC door.
After taking the handles off and removing the handles, you can use a screwdriver and take off the screws that attach the handles to the door frame. This will allow you to better access the pins that hold the cylinder. After that, you could try wiggling and tugging the cylinder to see if it becomes loose. When it does, push it towards you and then remove it from the socket.
After taking out the old lock cylinder, it is important to replace with a new one which includes anti-snap protection as well as anti-bump. You can do this yourself if have the right tools or you can engage a professional locksmith to complete it for you. This is a simple task that should take no more than five minutes.
Install the New Cylinder
A upvc lock could be damaged or broken in many different ways. For example the cylinder could be damaged or may isn't working as it should. Whatever the reason for changing your door lock made of upvc, it is crucial to select the correct size replacement. If the incorrect one is installed it could lead to your upvc door being more susceptible to a method known as "lock snapping" which is the cause of 25 percent of burglaries.
It is crucial to choose the right cylinder. The process is straightforward and takes only five minutes. To swap the cylinder and handle faceplate, you will need to take off the screws that are attached to them.
Before you get started, make sure that the handle is in a position to open and you have full access to the inside of the edging of the door and the side of the handle faceplate that holds the lock cylinder. This will enable you to easily remove the lock cylinder from the handle without having to move it or expose the internal components of the frame.
Then, remove the old cylinder and determine its measurements. It is important to know its overall length and the size of the cylinder which is used to lock or open the door. This will enable you to locate a new cylinder that is similar or smaller. This is the most crucial part of the entire procedure. The cylinder should be flush with the handle and not protrude more than 5mm from it.
Install the Handle
A lock made of upvc can jam if something breaks inside the case which controls the bolts that retract into the keep plate or strike. This can often be solved by adjusting the Allan key under the hinges. However, this can occasionally cause excessive stress on the parts within the casing in the middle and it is advised to call in an expert.
During the process of changing it is important to have easy and quick access to both sides of the handle, as well as having the right tools. It is also a good idea to prop the door open so it doesn't close during the procedure.
The first step is to loosen the screws that hold the handle with the screwdriver. Once these are loosened the handle can then be removed. After removal of the cylinder as well as the handle, it's now time to install the new handle. Make sure that the new handle is of the correct size for the cylinder you have currently and hole center. To determine the correct size you need to measure the length of the spindle on the lever you currently own. Make sure that the screw fix centre on the handle is the same as the screw fix centre of your existing cylinder or hole centre.
Replacement handles from Fab and Fixed come in different styles and are designed to last. These handles are ideal for those who wish to upgrade their Upvc handle and increase security for their home. The correct handle will make your home safe and secure, and difficult for thieves to enter.